logo
Telephone: 513.942.4007 US: Rose Scientific Inc.
Toll Free: 888.249.4074
Fax: 513.942.4077
Email: sales@rosescientific.com
 
Search  
Quote Request Quote Request
Rapid Response Rapid Response
 
Home Products Service Clearance Chemicals COVID-19    
Rapid Response or call Rose Scientific toll free at 888.249.4074
Send us an email message outlining any request and we will get back to you with the details!
Contact me Send information Quote request  
Your name Your email Your telephone number

Homogenizer Motors, the CAT Hand Held X120, Industrial Unidrive 1000D and Industrial High Volume X1740, for use with Dispersing Tools or Grinding Chamber

  Overview

A variety of homogenizer motors, from the hand held, high speed Model X120 to the high power, heavy duty industrial Model Unidrive X1000D, to the even higher power industrial model X1740, designed for higher volume.

X120 Unidrive X1000D CAT X1740 with DK30 Flow-Through Chamber


Compact, quietly operating benchtop in-line homogenizers capable of processing cannabis tinctures, beverages, syrups, and other solutions, up to 83 liters/min (22 gallons/minute) is available. This system could also be applied to a wide variety of hemp or other oils.

The X1740 homogenizers insure cannabinoid and terpene uniformity and retain reproducibly higher potency.

Once the motors are chosen there is an array of tools and generators to solve laboratory and industrial dispersal needs, from lighter research tasks to heavy duty pilot plant or batch processing with such products as toothpaste or tomato paste.


X120 Handheld High Speed
  • Hand-held high-speed drive motor
  • Electronic speed control from 5,000 – 35,000 rpm
  • Accepts dispersing tools up to 17 mm in diameter, T-6, T-10 and T-17
  • For small volumes of 0.1 to 1,000 mL

Unidrive X1000D High Power
  • High power, heavy duty drive motor
  • Electronic speed control from 4,000 - 33,000 rpm with digital display
  • Accepts all dispersing tools up to 30 mm in diameter
  • For volume of 1 to 3,000 mL

X1740 High Power, High Capacity
  • High power, heavy-duty drive motor
  • electronic speed control from 5,000 - 22,000 rpm
  • Accepts dispersing tools up to 40 mm in diameter
  • For volume of 100 – 20,000 mL


The CAT dispersing tools and generators have unique slanted rotor slots for fast processing and improved mixing turbulence. The dispersing tools are interchangeable and some (G20, G30, G40) have ceramic shaft seals, so they can be used under vacuum, pressure and abrasive materials. Rotors and stators are exchangeable and there are optional continuous flow chambers (DK30 and DK40) as well as a DK 40 Kit, which consists of drive unit X1740, a flow-through chamber with external cooling, bench mounting device and a G 40 generator.

All CAT disbursing shafts have the same coupling system, allowing all the drive motors to accept any choice of suitable shafts.

T17 Tool, F Generator T17 Tool, N Generator T17 Tool, V Generator T17 Tool, M Generator


Dispersing tools are sold complete with rotor and stators as F (fine viscosity), N (low viscosity), V (medium viscosity) F and M (knife version) types. Different rotors and stators are available to interchange. Replacement rotors and stators are available for all types of dispersing tools such as T-6, T-10, T-17, T-20, T-30 and T-40.

The T series tools have a Teflon bearing. Please enquire for more details about the ceramic sealed G-20, G-30 and G-40 tools, for use under vacuum, pressure or with abrasive materials.

Specifications (Click here):  Homogenizer Motors, the CAT Hand Held X120, Industrial Unidrive 1000D and Industrial High Volume X1740, for use with Dispersing Tools or Grinding Chamber

NumberDescriptionPrice $
60408 Model X1740 high power, heavy-duty drive motor with electronic speed control from 2,500 - 23,000 rpm, 1800 Watts, accepts dispersing tools up to 40 mm in diameter, ideal for pilot plant, industrial and or batch processing such as tomato paste or tooth paste, for volumes of 100 – 20,000 mL2,728.63
60406 Model Unidrive X1000D high power, heavy duty drive motor with electronic speed control from 4,000 - 33,000 rpm with digital display, 1050 Watts, accepts all dispersing tools up to 30 mm in diameter, ideal for pilot plant or batch processing of products such as tomato paste, for volumes of 1 to 3,000 mL1,766.57
60404 Model X120 hand-held high-speed drive motor with electronic speed control, 5,000 - 35,000 rpm for small volumes of 0.1 to 1,000 mL, accepts dispersing tools up to 17 mm in diameter, T-6, T-10 and T-17862.50
60420-000V T-6 Dispersing Tool, 6mm Ø, 55mm length with V Type Generator, 0.1 - 50 mL1933.52
60420-000N T-6 Dispersing Tool, 6mm Ø, 55mm length with N Type Generator, 0.1 - 50 mL1933.52
60420-000F T-6 Dispersing Tool, 6mm Ø, 55mm length with F Type Generator, 0.1 - 50 mL1933.52
60420-000M T-6 Dispersing Tool, 6mm Ø, 55mm length with M Type Generator, 0.1 - 50 mL1,091.32
60410-000V T-6 Dispersing Tool, 6mm Ø, 120mm length with V Type Generator, 0.1 - 50 mL1,121.68
60410-000N T-6 Dispersing Tool, 6mm Ø, 120mm length with N Type Generator, 0.1 - 50 mL1,121.68
60410-000F T-6 Dispersing Tool, 6mm Ø, 120mm length with F Type Generator, 0.1 - 50 mL1,121.68
60410-000M T-6 Dispersing Tool, 6mm Ø, 120mm length with M Type Generator, 0.1 - 50 mL1,121.68
60421-000 T-10 Dispersing Tool shaft only, without generator411.13
60421-000V T-10 Dispersing Tool with V Type Generator, 0.1 - 250 mL610.58
60421-000N T-10 Dispersing Tool with N Type Generator, 0.1 - 250 mL610.58
60421-000F T-10 Dispersing Tool with F Type Generator, 0.1 - 250 mL610.58
60421-000M T-10 Dispersing Tool with M Type Generator, 0.1 - 250 mL768.41
60426-000 T-17 Dispersing Tool shaft only, without generator471.96
60426-000V T-17 Dispersing Tool with V Type Generator, 5 - 1,000 mL640.93
60426-000N T-17 Dispersing Tool with N Type Generator, 5 - 1,000 mL640.93
60426-000F T-17 Dispersing Tool with F Type Generator, 5 - 1,000 mL640.93
60426-000M T-17 Dispersing Tool with M Type Generator, 5 - 1,000 mL798.84
60422-000 T-20 Dispersing Tool shaft only, without generator425.24
60422-000V T-20 Dispersing Tool with V Type Generator, 10 - 2,000 mL
689.38
60422-000N T-20 Dispersing Tool with N Type Generator, 10 - 2,000 mL689.38
60422-000F T-20 Dispersing Tool with F Type Generator, 10 - 2,000 mL689.38
60422-000M T-20 Dispersing Tool with M Type Generator, 10 - 2,000 mL847.19
60423-000 G-20 Dispersing Tool shaft only, without generator597.15
60423-000V G-20 Dispersing Tool with V Type Generator, 10 – 2000 mL923.40
60423-000N G-20 Dispersing Tool with N Type Generator, 10 – 2000 mL923.40
60423-000F G-20 Dispersing Tool with F Type Generator, 10 – 2000 mL923.40
60423-000M G-20 Dispersing Tool with M Type Generator, 10 – 2000 mL1,080.98
60414-000 T-30 20mm Ø Dispersing Tool shaft only, without generator1,004.55
60427-000V T-30 20mm Ø Dispersing Tool, 250mm maximum immersion depth, with V Type Generator, 30 - 5,000 mL1,385.66
60427-000N T-30 20mm Ø Dispersing Tool, 250mm maximum immersion depth, with N Type Generator, 30 - 5,000 mL1,385.66
60427-000F T-30 20mm Ø Dispersing Tool, 250mm maximum immersion depth, with F Type Generator, 30 - 5,000 mL1,385.66
60415-000 G-30 20mm Ø Dispersing Tool shaft only, without generator1,360.87
60428-000V G-30 20mm Ø Dispersing Tool, 280mm maximum immersion depth, with V Type Generator, 30 - 5,000 mL1,923.24
60428-000N G-30 20mm Ø Dispersing Tool, 280mm maximum immersion depth, with N Type Generator, 30 - 5,000 mL1,923.24
60428-000F G-30 20mm Ø Dispersing Tool, 280mm maximum immersion depth, with F Type Generator, 30 - 5,000 mL1,923.24
60428-000M G-30 20mm Ø Dispersing Tool, 280mm maximum immersion depth, with M Type Generator, 30 - 5,000 mL2,080.23
60414-000 T-40 20mm Ø Dispersing Tool shaft only, without generator1,004.55
60414-000V T-40 20mm Ø Dispersing Tool, 250mm maximum immersion depth, with V Type Generator, 100 - 20,000 mL1,566.90
60414-000N T-40 20mm Ø Dispersing Tool, 250mm maximum immersion depth, with N Type Generator, 100 - 20,000 mL1,566.90
60414-000F T-40 20mm Ø Dispersing Tool, 250mm maximum immersion depth, with F Type Generator, 100 - 20,000 mL1,566.90
60414-000M T-40 20mm Ø Dispersing Tool, 250mm maximum immersion depth, with M Type Generator, 100 - 20,000 mL1,724.73
60415-000 G-40 20mm Ø Dispersing Tool shaft only, without generator1,360.87
60415-000V G-40 20mm Ø Dispersing Tool, 280mm maximum immersion depth, with V Type Generator, 100 - 20,000 mL1,923.24
60415-000N G-40 20mm Ø Dispersing Tool, 280mm maximum immersion depth, with N Type Generator, 100 - 20,000 mL1,923.24
60415-000F G-40 20mm Ø Dispersing Tool, 280mm maximum immersion depth, with F Type Generator, 100 - 20,000 mL1,923.24
60415-000M G-40 20mm Ø Dispersing Tool, 280mm maximum immersion depth, with M Type Generator, 100 - 20,000 mL2,080.23
60409 AX 60 Analytical Grinding Mill Head with stainless steel grinding chamber and separate cooling channels, good for very hard materials such as rock, bones or teeth, converts the homogenizer into an analytical mill, for use with the X 1740
1,245.00
60428 DK30 Stainless steel flow-through chamber for shaft G20 and G30, high continuous flow-rate up to 2,000 L/hr, for use with Unidrive 1000D Series (with G20) or X 1740 (with G30)
889.06
60429-000 DK40 Stainless steel flow-through chamber, without generator, external cooling (a circulating chiller is required), high flow-rate up to 4,800 L/hr, supplied mounted on a base plate, for use with X 1740
2,091.25
60429-000F DK40 Stainless steel flow-through chamber, with G40 generatorand F Type Rotor and Stator, external cooling (a circulating chiller is required), high flow-rate up to 4,800 L/hr, supplied mounted on a base plate, for use with X 17402,645.30
60429-000V DK40 Stainless steel flow-through chamber, with G40 generatorand V Type Rotor and Stator, external cooling (a circulating chiller is required), high flow-rate up to 4,800 L/hr, supplied mounted on a base plate, for use with X 17402,645.30
60429-000N DK40 Stainless steel flow-through chamber, with G40 generatorand N Type Rotor and Stator, external cooling (a circulating chiller is required), high flow-rate up to 4,800 L/hr, supplied mounted on a base plate, for use with X 17402,645.30
60429-KIT 5,290.60
60491 Pedestal Stand (Suitable for X-120 Model)238.96
18900131 Plate Stand with Support Rod, base is 12 x 8 inches and the rod is 31 inches in height238.60
A113 H- Base Stand complete with Rod, base accommodates a central 25 mm (1”) diameter stand rod of length 960 mm (38”)385.00
60494 U-Stand (suitable for Unidrive X-1000 and X-1000D Models)531.55
60492 Cross Over Clamp138.77
60495 Special Cross Clamp for use with X-1740 Homogenizer128.82
60470-000 Universal Rotor Wrench, for all shafts 6 to 30mm, except G30 and T30 with M Type generator
81.80
60471-000 Socket Wrench for all shafts, 6 to 40 mm diameter55.62
60472-000 Rotor Wrench for T 1031.16
60473-000 Rotor Wrench for T 20 or G 2071.28
60476-000 Rotor Wrench for T 30 or G 3071.28
60477-000 Rotor Wrench for T 40 or G 40127.34
61442.0000 Replacement Knife Rotor for T6 Dispersing Tool 6M312.48
60460.000 Replacement Rotor for T6 Dispersing Tool 6V259.44
60461.0000 Replacement Rotor for T6 Dispersing Tool 6F259.44
6060441.60431 Replacement Generator for T10, F-Type F = F Rotor and F Stator211.23
60441.60430 Replacement Generator for T10, N Type N = F Rotor and V Stator211.23
60440.60430 Replacement Generator for T10, V-Type V = V Rotor and V Stator211.23
61446.61436 Replacement Generator for T10, M Type M = M Rotor and M Stator324.60
60439.60449 Replacement Generator, F-Type – Fine to Medium Viscosity F = F Rotor and F Stator, for use on T17 shaft210.75
60438.60449 Replacement Generator, N-Type – Low Viscosity or Coarse N = F Rotor and V Stator, for use on T17 shaft211.94
60438.60448 Replacement Generator, V-Type – Viscous V = V Rotor and V Stator, for use on T17 shaft210.75
61438.61448 Replacement Generator, M-Type – Knife/Cutting M = M Rotor and M Stator, for use on T17 shaft340.40
60444.60434 Replacement Generator, F-Type – Fine to Medium Viscosity F = F Rotor and F Stator, for use on T20 or G20 shaft330.71
60442.60432 Replacement Generator, V-Type – Viscous V = V Rotor and V Stator, for use on T20 or G20 shaft330.71
60442.60434 Replacement Generator, N-Type – Low Viscosity or Coarse N = F Rotor and V Stator, for use on T20 or G20 shaft330.71
61460.61450 Replacement Generator, M-Type – Knife/Cutting M = M Rotor and M Stator, for use on T20 or G20 shaft503.80
60437F.60447F Replacement Generator, F-Type – Fine to Medium Viscosity F = F Rotor and F Stator, for use on T30 or G30 shaft450.42
60447V.60437V Replacement Generator, V-Type – Viscous V = V Rotor and V Stator, for use on T30 or G30 shaft450.42
60447F.60437V Replacement Generator, N-Type – Low Viscosity or Coarse N = F Rotor and V Stator, for use on T30 or G30 shaft450.42
60447M.60437M Replacement Generator, M-Type – Knife/Cutting M = M Rotor and M Stator, for use on T30 or G30 shaft511.65
60476FF.60457F Replacement Generator, F-Type – Fine to Medium Viscosity F = F Rotor and F Stator, for use on T40 or G40 shaft562.38
60466VV.60456V Replacement Generator, V-Type – Viscous V = V Rotor and V Stator, for use on T40 or G40 shaft562.38
60467F.60456V Replacement Generator, N-Type – Low Viscosity or Coarse N= F Rotor and V Stator, for use on T40 or G40 shaft562.38
61465M.61455M Replacement Generator, M-Type – Knife/Cutting M = M Rotor and M Stator, for use on T40 or G40 shaft720.18