Humidity Chambers, Models HCP 108, HCP 153 and HCP 246

Overview

In the Memmert Humidity Chambers Models HCP 108, HCP 153 and HCP 246 high-precision control technology creates controlled and physiologically ideal surroundings for perfect environment simulation in building physics, construction materials, electronics, biology, zoology, botany and materials science.

The high-precision temperature and humidity control, the heating from all six sides, and a non-turbulent ventilation system in the working chamber insure reliability independent of chamber volume and load and an interior free of condensation.

The special feature of the HCP Humidity Chambers is the particularly uniform conditions inside the chamber. The air is heated by large-area all round heating. Humidity is provided by a dry steam generator that produces controlled evaporation of water supplied from an external tank by a self-priming pump. The sterile dry steam is introduced into the chamber above the fan and mixed into the air flow. A continuous uniform atmosphere is ensured by the turbulence-free chamber ventilation

Humidification and dehumidification control starts to operate approximately five minutes after the set temperature has been reached.

Humidity Chamber HCP

Features of the HCP 108, HCP 153 and HCP 246:

Temperature range up to +90 °C (without humidity up to +160 °C)
Three model sizes (108L, 153L and 246L)
State-of-the-art control technology based on the Memmert Perfect performance class
An active humidity control system is integrated
Double doors standard for all models: prevention of contamination and drops or rises in temperature, and at the same time an optimal view of the sensitive load through wide-area interior glass doors
The inner chamber, including the ventilation system, the water trays and all sensors, can be sterilized at 160 °C in a 4 hour program using the standard STERICard

Humidity Chamber Display

Digital 7-day-program-timer with real time clock, precise minute setting
Timer for tempering profiles of up to 40 ramps, each segment adjustable from 1 min. up to 999 hours
Digital display (LED) of all set parameters, such as temperature, weekdays, time, humidity and set-up values

Specifications (Click here):

Humidity Chambers, Models HCP 108, HCP 153 and HCP 246

As much function as necessary, as much individuality as possible! Contact Rose Scientific to custom design the Memmert Humidity Chamber Model HCP 108, HCP 153, or HCP 246 that does what it needs to do with the resources available.

The ordering number is assembled from the catalog numbers of the various options at the time the Humidity Chamber model is ordered. Generation 2003 options and accessories are available for the HCP 108, HCP 153 and HCP 246.

Number	Description	Price $
HCP 108	Humidity chamber Model HCP 108, 108 L capacity	Inquire
HCP 153	Humidity chamber Model HCP 153, 153 L capacity	Inquire
HCP 246	Humidity chamber Model HCP 246, 246 L capacity	Inquire
H8(x)	Additional Pt100 temperature sensor, positioned flexibly in chamber or load, for local temperature measurement (up to 3 additional sensors are possible) - actual temperature shown on multifunction display, recording in integral ring store and documentation via "Celsius" software or printer.	Inquire
E7(x)	Perforated stainless steel shelf	Inquire
E3(x)	Stainless Steel Grid	Inquire
F0	Moisture tight entry port for introducing connections at the side; can be closed from inside by silicone stopper, 23 mm clear diameter, left centre/centre	Inquire
F1	Moisture tight entry port for introducing connections at the side; can be closed from inside by silicone stopper, 23 mm clear diameter, left centre/top	Inquire
F2	Moisture tight entry port for introducing connections at the side; can be closed from inside by silicone stopper, 23 mm clear diameter, right centre/centre	Inquire
F3	Moisture tight entry port for introducing connections at the side; can be closed from inside by silicone stopper, 23 mm clear diameter, right centre/top	Inquire
G3	Stacking version for 2 ovens of equal size (foot locators for bottom oven modification)	Inquire
G5	Subframe 622 mm high	Inquire
G7	Subframe 130 mm high (for two stacked cabinets)	Inquire
V3	Temperature profile write/read unit for programming via PC with USB for writing to and reading from the chip card, up to 40 ramps	Inquire
V4	Additional chip card, blank, formatted (32 kb MEMoryCard XL for a maximum of 40 ramps)	Inquire
V9	STERICard (additional or as replacement) for automatic chamber sterilisation cycle (not for sterilising the load!)
V1	Oven-linked authorization card (User-ID-Card) - prevents undesired manipulation by unauthorized third parties	Inquire
V2	Computer interface RS485 (for networking a maximum of 16 ovens) instead of interface USB	Inquire
W6	RS232 interface instead of USB	Inquire
W4	Interface Ethernet instead of RS232 inclusive software "Celsius Ethernet-Edition"	Inquire
W1	Parallel/USB converter cable with integrated power supply unit to connect PCL3-compatible HP printers with USB interface to MEMMERT units.	Inquire
W2	Documentation package consisting of parallel USB converter cable including PLC3-compatible HP colour inkjet printer with USB interface (HP Deskjet 6980 or successor) for direct connection of printer to Memmert unit	Inquire
W7	USB connection cable for computer interface	Inquire
V6	Connection cable for computer interface RS232 according to DIN 12 900-1	Inquire
D4	Process-dependent electromagnetic door lock	Inquire
H5	Potential-free contact (24V/2A) with socket 3 pin, according to NAMUR NE 28 for external monitoring (indication set point reached)	Inquire
H6	Potential-free contact (24V/2A) for combined fault message (e.g. supply failure, sensor fault, fuse)	Inquire
Z5	Works calibration certificate for 80% rh (measured at 50 °C)	Inquire
Q1	IQ check list with works test data for oven as support for validation by customer	Inquire
Q2	OQ check list with works test data for one freely selectable humidity and temperature value including temperature distribution survey for 27 measuring points to DIN 12880: 2007-05 as support for validation by customer	Inquire
Q3	Software conforming to US FDA "Celsius FDA-Edition" for up to 16 units	Inquire
Q4	Integration of additional units (up to max.16 units) into an already existent US FDA software license	Inquire

Rapid Response	or call Rose Scientific toll free at 888.249.4074
Send us an email message outlining any request and we will get back to you with the details!
Contact me	*Send information*	Quote request

Your name	Your email	Your telephone number