• % Transmittance (0 – 199.9%)

• Absorbance (-0.300 to 3.000A)

• Concentration (Range -300 to 9999)

• Concentration by Factor (range 0.000 to 9999.99)

• Unit selection (ppb, ppm, ug/L, mg/L, g/L, %, M and blank)

• 4 scan intervals (0.2nm, 1nm, 5nm, and 10nm)

• Scan speeds of 1200nm/min

• Baseline correction

• Instant display of spectrum

• Automatic re-scale

• Peak and valley detection, area under curve, plus addition/subtraction feature

• Hard copy of data/scan with printer accessory

 Multi-wavelength analysis

• Read and display up to 4 wavelengths at the same time

• Simple one key calibration

• Instant calculation results

• Display option of Transmittance, Absorbance, or Concentration

• Software for Kinetics is included as standard.

• Temperature control is achieved with the Peltier cell accessory (sold separately)

• Post run analysis including line of best fit, initial value, slope, and concentration calculation

• Unit can perform runs on 4 cells simultaneously

• Lag time selection (0 – 9999 seconds)

• Measurement time (10 – 9999 seconds)

• Auto rescale

• Graphical display of data

 Quantitation

• Up to 20 calibration points can be used

• Up to 5 duplicate readings on each standard

• 8 curve fits to choose from

• Auto calibration at start

• Auto rescale

Data Handling / Interfacing

• Fixed baud rate of 1200

• Results can be downloaded by a single touch of the print key

• Analog output is proportional to the displayed reading (1mV per 0.1%T, 0.001A or 1 concentration unit)